Long / medium range PTZ camera with a range of 1-5 km range

Description

The PTZ-4000 long / medium range PTZ camera system is a custom made camera solution:

Pan tilt:
The IP66 pan tilt with built-in RS485 Pelco D controller is a heavy duty step motor pan tilt unit. The pan run 360° endless rotation with built-in sliprings to transfeer the power, telemetry and video. The unit is also available without endless rotation 0-355°. The pan/tilt have a wide range speed from slow speed 0,1° to high speed 120° and a very high accuracy of pan: 0.016°, tilt 0.010°.

Housing:
The IP66 housing made of aluminum and stainless fittings can house motorized lenses up to 330mm. The housing can be equipped with Wiper, Washer, Heater with fan, circulation fan and other options.

Lens:
The PTZ system can be ordered with 33X zoom 10-330mm F1.7 or 30X zoom 10-300mm F1.5.
The 33X zoom 10-330mm F1.7 can be ordered with one push auto focus function.

Camera:
The normally used camera is a very high sensitive and high dynamic 1/3″ ccd camera, 960H, Effio WDR II. For applications where extreme sensitivity is needed a EMCCD camera can be installed.

The below data present the basic setup of the long / medium range camera system:

Specifications for PTZ-4000 long / medium range PTZ camera
Material	Aluminum
IP rating	IP66
Color	Gray/white
Size (LxHxW)	761 x 670 x 250 mm
Weight	Approx 30 Kg (with lens and camera approx. 35 kg)

Pan angle	0-345° (360° continuous optional)
Tilt angle	Tilt -70/+30° (Tilt -85/+85° option)
Pan speed	Pan 0.1°~ 40°/sec ±0.2° (variable speed)
Tilt speed	Tilt 0.1°~ 10°/sec ±0.2° (variable speed)

Absolute position support	Yes
Electric accuracy	Pan: 0.033° and Tilt :0.0125°
Mechanical lash	<0,3°
Presets	100 presets
Preset accuracy	NA

Motor type	DC motor
Gear type	Worm gear
End-stop adjustable	Mechanical end-stop internally


Interface	RS-485
Baud rate	2400, 4800, 9600, 19200 bps, N,8,1
Protocol	Pelco D
Address	1-256
Temperature range	-10°C +60°C-(-25°C +60°C with optional heater)
Voltage supply	24 VDC
Power consumption	NA

Motorized lens control	Yes
Aux control	Yes (5 aux relays and 1 motorized extender control output)
Video cable	Yes (HDSDI cable optional)
Network cable	Optionally

Camera and lens specifications depends of the choosen camera and lens type, ask for details.

If you need a more customized PTZ camera, then we can built one based on our pan/tilt and camera housing products.

Options

See through fog, rain, snow, sand

If the "See through option" is choosen the PTZ-6000 system will be able to see through fog, rain, snow, sand and other enviromental factors that lowers the visibility.
Wiper

The housing can be delivered with a built-in internally mounted wiper motor and external wiper arm. The wiper is turned by a command from the Pelco D protocol and when turned off the wiper will self park in the side of the window.
Cold climate option, Heater with fan

The housing can be delivered with a built-in camera housing heater, not the standard window heater, but a heater element that heat up the housing above freeze temperture. The heat from the automatic regulated heater element is ventilated around the housing with a fan.
Internal fan

The housing can be delivered with a built-in fan to remove hot spots in the housing generated by camera heat or other sources of heat. The fan will equal the heat around the housing.
Washer

The long range ptz camera system can be delivered washer units. The camera washers are available in stainless steel and in various lift hight and size of water container.
Heavy Duty Tripod

This Heavy Duty Tripod can load 80 Kg. It is made of aluminum and can be setup to a hight between 750mm and 1250mm. The transport weight of the Tripod is approx. 11 Kg
Keyboard

The PTZ camera can be delivered with a 3 axis keyboard that can control up to 255 PTZ cameras. 128 preset positions and absolute position readout. The keyboard is running RS485 (option RS422) and Pelco D protocol.